Sunnydaze Decor GSI-274 Assembly

OUTDOOR FLOOR FOUNTAIN WITH CLOCK - NATURAL SLATE
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
No. Parts
A Basin
B Spotlight with AC Adapter
C Bolt
D Washer
E Electric Submersible Pump
F Lid
G Washer
H Bolt
I Fountain Body
J Clock
K Light Insert
L Decorative Stones
The water tubing is built into the fountain body. Take care
NOTE:
when handling the water tube; detaching the water tube from the
fountain will damage the fountain and void the product warranty.
Slate is a natural product; the colors and texture of each piece
are unique, and no two fountains will look the same. The copper
components may patina; this is a natural characteristic of copper.
These natural characteristics of this fountain are not cause for return
or replacement.
ASSEMBLY
1. Connect the lid to the fountain body, ensuring the water
tubing goes through the groove in the back of the lid.
2. Firmly connect the pump to the fountain body.
3. Place the light into the light insert.
4. Run the light cable through the front opening in the lid and set the light insert in the opening.
5. Gently place the assembled portions onto the basin, ensuring the light and pump cables run through the groove in the
back of the basin.
6. Secure the lid to the basin with the washers and bolts.
7. Hook the pendulum onto the clock and place the clock on the fountain
8. Gently lay the decorative stones on the lid.
9. Fill the fountain with enough water to keep the pump fully submerged during operation; approximately 3 gallons.
10. Plug the power cords into properly grounded GFCI outlets.
Note: When first used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to flow.
SPQ50043
Purchase Date: /
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerservice@nethealthshops.com, or via our contact us page at
GSI-274
Select a smooth, level surface to place the fountain.
Qty.
Ensure all parts are
1
accounted for before
disposing of packaging.
1
2
2
1
1
2
2
1
1
1
2-PERSON
ASSEMBLY
1
PK
RECOMMENDED
03/2020
/ Order/Customer Reference Number:
L
B
K
D
C
A
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
I
H
G
F
E
Pump
Light
CONNECT
Page 1 / 2
J