Program Play; How To Select Program - Haier L26V6-A8 Owner's Manual

Preset program
CH+
VOL- MENU VOL+
CH-

Program play

DISPLAY FAV. POWER
USB
-/--/--- Q.VIEW SLEEP
English-13
1. Current program
Press VOL-/+ or digit button on the remote controller
for current program option.
2.Skip
If current program number is to be cleared, press
VOL-/+ button to set Skip mode.
3.Program lock
If current program number is to be locked, press
VOL-/+ button to set on Prog. Lock.
4. Sound system
If current program sound is to be changed, press
VOL-/+ button and then the sound system will
change in sequence of Auto D/K B/G M I L.
Note: When channels are being scanned, sound
system will be automatically identified and set
according to television signals. If the sound system
is changed by manual operation, the correct sound
might not be broadcast.
5. Fine tune
If there is abnormal picture or sound in individual
program, press VOL-/+ button to make fine tune until
satisfactory picture and sound are achieved.
After Fine Tune is activated, AFC will be active for
the program, changing the program number into
yellow color. If green color is desired for the program
number, manually scan the same program.

How to select program

1. Select desired program
Select buttons in sequence
Press CH+/- button for program option. (Note:
If Skip mode is activated, the program will not
appear.)
Select buttons directly
If program number 1~9 is selected, press digit
1~9 directly.
If two-digit or 3-digit programs are selected,
press -/--/--- button twice or trice. When icon --
or --- appears on the screen, press digit 0~9
program numbers.
If selected channel program is set at Lock on mode and
no password has been entered after initiation of the
television, the screen will indicate require password
entry. If wrong password is entered, channel selection
will fail and previous program will still stay on the screen.
The program locking password can be modified in the
preset menu and previous password will be required.