Other Functions Position And Phase Adjust - Haier L26V6-A8 Owner's Manual

Other functions
CH+
VOL- MENU VOL+
CH-
CH+
VOL- MENU VOL+
CH-
English-21
Position and phase adjust
In YUV and D-SUB input mode, H-Position, Phase
and Scope of pictures can be adjusted to eliminate
transverse line interference and decentered picture
as follows:
When YUV/D-SUB input mode is set.
1. Press Menu button on the remote controller and
CH+/- for option of picture position adjust. The
menu display is as follows:
H-Position
V-Position
Phase
A
B
C
Picture Position
H-Position
V-Position
Phase
Frequency
A
B
C
Picture Position
2. Press VOL+ button on television and remote
controller to enter the menu of picture position
setup.
3. Press CH+/- button for desired adjust
parameter option.
4. Press VOL+/- for desired adjust parameter
option until satisfactory value is achieved. When
VGA signals are received, the automatic mode
is used for parameter adjustment. (excluding
HDTV 1080P, 1080i and 720P series)
Auto Adjust
50
50
50
Enter
50
50
50
50
Enter