Table of Contents
Advertisement
Basic Receiving and Playing Operations
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the
number of the channel to be recovered.
2. Do the above steps again.
3. Press
to set Skip as Off.
/
Automatic search
A
Press
MENU on the remote control to display main
menu, and then press
menu.
B
press
/
to select the Auto Search option, press
OK or
to enter the auto search menu, afterwards
press
to select the Confirm option, and finally
/
press OK to confirm the starting of auto search.
Channel Edit
Auto Search
Prog. Exchange
Tuning
C
During auto search, the scale value on the progress
bar is continually increasing, indicating the auto
search is in progress. After finishing the auto search,
the TV will play the channel starting the auto search.
To stop the search in halfway, just press MENU/OK,
and the TV will play the first searched channel.
Channel Edit
Auto Search
Auto Seaching...
Prog. Exchange
Found Channel(s):2
Frequency:
14 LCD television Owner's Manual
/
to select Tuning
Auto Search
Do you want to start
auto search?
Return
Move
OK
Menu
OK
152.25MHz
40%
Exchange
A
Press
MENU on the remote control unit or MENU on
the TV's front panel to display main menu, and then
press
/
to select Tuning menu.
B
Press
/
to select the Prog. Exchange option,
and then press OK to enter its submenu.
C
Press
/
to select the To Channel option, and
then press
/
to set the found to be exchanged to.
Channel Edit
Auto Search
Prog. Exchange
Tuning
Current Channel
To Channel
D
After adjusting the current channel and the found to
be exchanged to, press
to the Exchange option, and then press OK to start
exchange and exchange the program on current
channel to the channel you set for exchange.
Watching TV Program
You can watch TV program in a presetting channel.
How to select the desired program
A
Using Program number buttons
Directly enter the channel number with the numeric
keypad on the remote control. If to select channel
numbers of double-digital or three-figure, press
continuously the numeric buttons in three second.
B
Using
CH
/CH
buttons
Press CH to select a channel number in number
increasing direction. Press CH
number in number decreasing direction.
How to select the desired sound
Press VOL-/+ buttons on the remote or the front of
Prog.Exchange
0
0
Return
Move
OK
Menu
OK
/
to move the cursor
to select a channel
Advertisement
Table of Contents
