Related Manuals for Haier L26V6-A8K
Summary of Contents for Haier L26V6-A8K
- Page 1 OWNER`S MANUAL MODEL : Please READ this manual carefully before operating your TV, and retain it for future reference. LCD TV L26V6-A8K L32V6-A8K L37V6-A8K L42V6-A8K L26V6-A8 L32V6-A8 L37V6-A8 L42V6-A8...
-
Page 2: Warning
Congratulations on your purchase, and welcome to the family ! Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. -
Page 3: Important Safety Instructions
Important Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. - Page 4 Important Safety Instructions a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have been fallen into the unit. c. If the unit has been exposed to rain or water. d.
-
Page 5: Table Of Contents
Table of Contents Warning Important Safety Instructions... Buttons and interface location... Front control panel Rear control panel... Remote controller Keys of remote controller Function introduction Effective range External Equipment Connections ... Operation Set up your TV... Switching ON/OFF the TV set... Choose the Menu Language... -
Page 6: Buttons And Interface Location
Buttons and interface location -This is a simplified representation of front panel. -Here shown may be somewhat different from your TV. Front control panel MENU TV/AV The buttons are on the bottom of the TV set) 1.Remote control signal receive window. 2.Power indicator: in red when standby mode, in blue when display. -
Page 7: Rear Control Panel
Buttons and interface location Rear Control panel Power Cord Socket This TV operates on AC power. The voltage is PC VIDEO Input indicated on the Connect the monitor Specifications page. output connector from Never attempt to operate a PC to the jack the TV on DC power. -
Page 8: Remote Controller
Remote control Inserting Batteries .Slide open the cover of the battery compartment on the back of the remote controller. Precautions As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect. -
Page 9: Keys Of Remote Controller
Keys of remote control - The remote controller cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction STILL Picture static SLEEP Displaying sleep time, adjustable MUTE Switches the sound on or off... -
Page 10: Effective Range
Remote control Effective range -Here showns may be somewhat different from your TV, is only the graphic solution, please take material object as. Ensure the remote control is pointed toward the remote control window on the display. No obstacles should be placed between the remote control and the remote control window. -
Page 11: External Equipment Connections
External Equipment Connections Antenna Connection Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different. outdoor Mixer antenna additional purchase Antenna input 75 standard coaxial type... -
Page 12: External Equipment Connection
External Equipment Connection NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. -
Page 13: Dvd Connection
External Equipment Connections DVD connection How to connect . Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the HDTV IN jacks on the TV and connect the DVD audio outputs to the HD-AUDIO jacks on the TV, as shown in the figure. -
Page 14: Pc Connection
External Equipment Connections PC connection How to connect . To get the best picture quality, adjust the PC graphics card to ( 1024x768),60Hz. . Use the TV`s PC IN port for video connections, depending on your PC connector. . Then, make the corresponding audio connection. -
Page 15: Connecting Headphones
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. ANT IN Power source AC Outlet Wider Hole and Blade Polarized AC Cord Plug Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. -
Page 16: Set Up Your Tv
Set up your TV -There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. -In the manual, the OSD(on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation. -
Page 17: Tuning Menu
Tuning menu This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Automatic search Press MENU button and then use CH+/- button to select the TUNING menu. -
Page 18: Manual Search
Tuning menu Manual search If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. Press MENU button and then use CH+/- button to select the TUNING menu. Press VOL+/- button and then use CH+/- button to select Tuning Program. -
Page 19: Program Table
Tuning menu Program Table Press MENU button and then use CH+/- button to select the TUNING menu. Press VOL+/- button and then use CH+/- button to select Program Table. Press VOL+/- button to enter the submenu. You can press CH.LIST button again to enter the submenu. -
Page 20: Edit Name
Tuning menu If the colour of some channel is abnormal Usually this should be set in the auto position. However if the colour displayed on the screen are incorrect, you can manually select the correct colour system. Press MENU button and then use CH+/- button to select the TUNING menu. -
Page 21: Skip
Tuning menu Skip After the programs are presetting, you can skip some programs so that to select your favorite channels only. Press MENU button and then use CH+/- button to select the TUNING menu. Press VOL+/- button and then use CH+/- button to select Tuning Program. -
Page 22: How To Select The Desired Program
Tuning menu You can watch TV program in a presetting channel. How to select the desired program Using "Program number" buttons Press digit button to select the program. If 2-digit or 3-digit programs are selected , press digit buttons you needed continuously with in3 seconds Using CH+/- button. -
Page 23: Picture Adjustment
Picture Adjustment The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. picture modes The picture mode provides the pre-defined images settings. Press the P.STD button to select the option.(Normal/Soft/Personal/Bright) Personal: A spare setting that can be adjusted to personal status... -
Page 24: Sound Adjustment
Sound Adjustment Sound modes The sound mode provides the pre-defined sound settings. Press the S.STD button to select the option.(Music/Standard/Personal/Hall) This select the modes for sound reproduction dependent on the broadcast signals or signals from external inputs received. Press CH+/- button to Select Audio Mode, press VOL+/- button to select the Personal: A spare setting that can be adjusted to personal tastes... - Page 25 Sound Adjustment Eliminate sound When you need to pay attention to surrounded sounds, or there is a telephone calling you or there are some guests visiting you, the sound elimination (mute) function is very convenient. Press the MUTE button on the remote control and "Mute" type face will display on the lower part of the screen.
-
Page 26: Ime Setting
Time Setting Clock setting The clock will only work if the TV set is turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power, the clock loses power and will need to be reset when the power is reconnected. Press MENU button and then use CH+/- button to select the TIMER menu. -
Page 27: Function Menu
Function menu It is possible to select language, OSD transparent, Menu Timer and Calendar of the menu as follows: Function setup Press MENU button and then use CH+/- button to select the FUNCTION menu. Press VOL+/- button and then use CH+/- button to select the desired option. -
Page 28: Adjust Menu
Adjust menu The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. Adjustment Setup When PC input mode is set Press MENU button and then use CH+/- button to select the ADJUST menu. Press VOL+/- button and then use CH+/- button to select the desired option. - Page 29 Adjust menu In PC input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference and decentered picture as follows: Adjust This is used for adjusting H Position and V Position as well as relative parameters in PC and mode.
-
Page 30: Lock Setup
Lock setup The television has the function of security default lock. Password needs to be entered when the program lock mode is to be set. Lock setup Press H.LOCK button on remote control, Password will appear on the screen. If password is correctly entered, the LOCK menu will be displayed. If the password is not correctly entered, you will be required to reenter the password and the cursor will remain onscreen. -
Page 31: Source Lock
Lock setup Prog Num Prog Num is opted for setting up preset channel. Press CH+/- button to select Prog Num. Press VOL+/- button, to select channel number.(The item is not available except TV signal.) Source Lock Source Lock is opted to hinder external input modes, such as AV, Scart and PC. -
Page 32: Other Functions
Other functions NICAM If the broadcaster is transmitting Bilingual sound service. The button on the remote controller will allow up to 2 separate languages to be selected. You can press the Display function If current program number, color system and sound system are to be displayed on the screen, press DISPLAY button, and all the related information will appear at right up corner of the screen. -
Page 33: Teletext Functions
Teletext functions Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular programme is being broadcast (cable networks, satellite channels, etc.). - Page 34 Teletext functions (MIX) While in Teletext mode press the superimposed on top of the TV picture. Press the button again to revert back to Full text. (HOLD) Pressing the button will stop the teletext page automatically updating. This feature is very useful where there are several teletext pages or data on the same page number.
-
Page 35: Maintenance
Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen . -
Page 36: Specifications And Functions
Specifications and functions Sound System External Antenna Impedance Storage Temperature Storage Humidity L26V6-A8(K) L32V6-A8(K) L37V6-A8(K) L42V6-A8(K) Model Size (Wx x ) unit: mm 794 210 505 main component Net Weight(Kg) 13kg L32V6-A8(K) L37V6-A8(K) L26V6-A8(K) 1366X768(Dot) 1366X768(Dot) ~150-240V , 50/60Hz PAL, SECAM, NTSC D/K,I,B/G,L,L 75 ohm 90%, non-condensing... -
Page 37: Troubleshooting
Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. No picture, no sound Blank screen No sound Poor sound No picture in some... - Page 38 0090508958 01...
Need help?
Do you have a question about the L26V6-A8K and is the answer not in the manual?
Questions and answers
Can't access time menu
To access the time menu on a Haier L26V6-A8K, follow these steps:
1. Press the MENU button on the remote control.
2. Use the CH+/- buttons to navigate to the TIMER menu.
3. Press the VOL+ button to enter the TIMER menu.
From there, you can set the Remind Time and Remind Prog. by using the CH+/- and digit buttons.
This answer is automatically generated
@Mr. Anderson
@Mr. Anderson I don't have a remote. The problem is that I can't get to the time menu. When I press the menu button, I see 5 icons on the left The last one is for the time menu. |However when I press the P+ button repeatedly, it goes to the picture menu, the language menu, the sound menu, and then back to the picture menu. It never goes to the time menu.