1525Μ And1525Ef Pump Control; Electronic Components In The Waters 1525 Pump - Waters 1525M Installation And Maintenance Manual

Table 1-2 describes the functions of the electronic components in the Waters 1525 Pump.
Table 1-2 Electronic Components in the Waters 1525 Pump
Component
Cooling fan vent
Ethernet port
Fuse holder
I/O terminal block
IEEE-488 address
switches
IEEE-488 port
Power module
Power switch
RS-232 port
1.3 1525µ and1525EF Pump Control
Waters software allows monitoring and control of Waters 1525µ and 1525EF Pumps in
binary applications. Using Waters software, you can do the following:
• Set all pump control parameters and operating ranges (see the appropriate software
documentation for details).
• Define binary gradient conditions for a run (see
information, or refer to the software documentation).
• Prime the pump (see
Exhausts air for cooling internal electronics.
Provides an Ethernet network connection for remote opera-
tion (reserved for future use).
Contains power fuses.
Provides input and output contact closures for connection
to external devices.
Sets the IEEE-488 address for the pump.
Provides a National Instruments™ GPIB interface to the
MassLynx workstation.
Provides receptacles for power cord connection and the
fuse holder.
Powers the pump on and off.
Provides a digital signal connection for remote operation
(for service use only).
Section 3.2.1 on page 48).
Description
Table A-5 or Table A-6
1525µ and1525EF Pump Control
1
for more
30