Installing Flow Sensors
Installing Flow Sensors
2.
Flow sensors detect when product is flowing through the run.
Provided Parts
Part Name
1-inch flow sensor or
1.25-inch flow sensor
Adapter (optional)
Hose clamp
Tools Needed
•
5/16 inch socket, 5/16 inch nut driver on a cordless drill, or a flathead screwdriver
•
Measuring tape
•
Cutting tool, such as a PEX tubing cutter, box cutter, or shears
Installation Location
Installed at the beginning of every final run hose.
600840-000069, rev 1.0
Figure 1: Flow sensor
Figure 2: Flow sensor installation location
Recon Blockage Plus™ Installation Manual
Part Number
153510-000022 or
153510-000066
353070-000022 or
353070-000112 or
353070-000252
356060-000025
Quantity
1/run
2/run
2/run
Page 7 of 35