Figure 10: Ecu Installed On A Tower (Horizontal Installation); Figure 11: Installing The Ecus From Left To Right - Recon BLOCKAGE+ Installation Manual

Installing ECUs
Installing the ECUs (Horizontal Installation)
NOTE: This section is for installing the ECUs in the horizontal orientation. If you've already
installed your ECUs in the standard (vertical) installation, skip this section.
Provided Parts
Part Name
ECU
3/8'' lock nut
3/8'' flat washer
2.5" diameter U-bolt or
5" diameter U-bolt
Vibration damping mount
ECU mounting bracket
3/8" x 1" bolt
3/8" x 2" bolt

Figure 10: ECU installed on a tower (horizontal installation)

NOTE: ECUs can be mounted in any order; however, we recommend installing the ECUs in
numeric order from left to right (when facing the back of the tractor) based on the ECU's serial
number. The serial number is located on the front of the ECU. Use the table in Appendix B to
record your system setup.
600840-000069, rev 1.0
Part Number
153510-000182
352011-000045
352012-000031
352013-000007 or
356060-000108
353070-000239
353070-000490
356060-000400
356060-000371

Figure 11: Installing the ECUs from left to right

Recon Blockage Plus™ Installation Manual
Quantity
1/manifold
(for standard setup)
2/ECU, plus 2
4/ECU, plus 4
1/manifold
2/ECU
2/ECU, plus 1
2/manifold
2/ECU
Page 12 of 35