Installing The Gateway Harness (353050-000101); Installing The Gateway Extension Harnesses (353050-000103) (Tow-Between Only); Installing The Power Harness (353050-000098); Installing The Tractor Harness (353050-000100) - Recon BLOCKAGE+ Installation Manual

Table of Contents

Advertisement

Installing Harnessing
3. Chain the remaining 20' ECU harnesses together by connecting S1 to S2.
4. Insert a 4 pin sealing plug (153510-000051) into S2 of the leftmost and the rightmost
20' ECU harnesses at the end of the implement.

Installing the Gateway Harness (353050-000101)

1. Connect S6 of the gateway harness (353050-000101) to the connector on the work
switch.
2. Connect S1 of the gateway harness.
a. Tow-behind: Connect S1 of the gateway harness to Port A of the gateway.
b. Tow-between: Connect S1 of the gateway harness to S3 of a gateway extension
harness (353050-000103).
3. Connect S2 of the gateway harness.
a. Tow-behind: Connect S2 of the gateway harness to Port B of the gateway.
b. Tow-between: Connect S2 of the gateway harness to S4 of a gateway extension
harness.
4. Insert a 3 pin CAN terminator plug (356070-000104) into T1 and T2 of the gateway
harness.
Installing the Gateway Extension Harnesses (353050-
000103) (Tow-Between Only)
NOTE: If you have a tow-behind air cart, skip this step.
1. Connect S2 of the gateway extension harness to S4 of another gateway extension
harness.
2. Connect S1 of the gateway extension harness to S3 of another gateway extension
harness.
3. Connect S1 of the second gateway extension harness to Port A of the gateway.
4. Connect S2 of the second gateway extension harness to Port B of the gateway.

Installing the Power Harness (353050-000098)

1. Connect S2 of the power harness (353050-000098) to S5 of the gateway harness.
2. If you're installing on a tow-between cart, connect S1 of the power harness to S2 of
another power harness.

Installing the Tractor Harness (353050-000100)

1. Connect S2 of the tractor harness (353050-000100) to S1 of the closest power harness
(if you have more than one).
2. Connect S1 of the tractor harness to the tractor's three-pin power outlet in the tractor
cab.
NOTE: If your tractor does not have a convenience plug, contact your dealer for assistance.
600840-000069, rev 1.0
Recon Blockage Plus™ Installation Manual
Page 24 of 35

Advertisement

Table of Contents
loading

Table of Contents