Figure 7: Ecu Installed On A Tower (Standard Installation); Figure 8: Installing The Ecus From Left To Right - Recon BLOCKAGE+ Installation Manual

Installing ECUs
Installing the ECUs (Standard Orientation)
NOTE: This section is for installing the ECUs in the standard (vertical) orientation. If your dealer
ordered you a horizontal mounting kit, skip this section and use the instructions in Installing the
ECUs (horizontal installation).
Provided Parts
Part Name
ECU
3/8'' lock nut
3/8'' flat washer
2.5" diameter U-bolt or
5" diameter U-bolt
Vibration damping mount
ECU mounting bracket
3/8" x 2" bolt
1 ECU per manifold

Figure 7: ECU installed on a tower (standard installation)

NOTE: ECUs can be mounted in any order; however, we recommend installing the ECUs in
numeric order from left to right (when facing the back of the tractor) based on the ECU's serial
number. The serial number is located on the front of the ECU. Use the table in Appendix B to
record your system setup.
600840-000069, rev 1.0
Part Number
153510-000182
352011-000045
352012-000031
352013-000007 or
356060-000108
353070-000239
353070-000490
356060-000371

Figure 8: Installing the ECUs from left to right

Recon Blockage Plus™ Installation Manual
Quantity
1/manifold
(for standard setup)
2/ECU
4/ECU
2/manifold
2/ECU
2/manifold
2/ECU
2 ECUs per manifold
Page 10 of 35