Overview; Controls, Indicators And Connectors - General DataComm TMS-3000 Operating And Installation Instructions

OVERVIEW

CONTROLS,
INDICATORS AND
CONNECTORS
SECTION 3
INSTALLATION
The CELP Voice Channel Module operates automatically after it is in-
stalled (refer to Section 2, Installation). You simply send and receive
analog voice signals while the CELP Voice Channel Module functions
transparently. You may check the operation of the CELP Voice Channel
Module by monitoring the front panel indicators.
Figure 3-1 illustrates the CELP Voice channel module front panel and ex-
plains the function of each control and indicator. Connector pin assign-
ments for the CELP Voice channel module are described in Appendix E of
this manual.
3-1