Table of Contents
Advertisement
STATIC SENSITIVE DEVICES
PROPER HANDLING AND GROUNDING
This equipment contains electrostatic sensitive devices. Use ESD precautionary
procedures when removing or inserting parts or printed circuit (pc) cards. Keep parts
and pc cards in their antistatic packaging material until ready to install.
The use of an antistatic wrist strap, connected to the grounded equipment frame or
chassis, is recommended when handling pc cards during installation, removal, or
setting of on-board option switches. Do not use a conductive tool, such as a screwdriver
or paper clip, to set the position of the option switches.
INSTALLATION SAFETY INSTRUCTIONS
a. Never install telephone wiring during a lightning storm.
b.
Never install telephone jacks in a wet location unless the jack is specifically
designed for wet locations.
c.
Never touch uninsulated telephone wires or terminals unless the telephone line has
been disconnected at the network interface.
d. Use caution when installing or modifying telephone lines.
Potentially hazardous voltages exist within this unit.
ATTENTION!
PRECAUTIONS REQUIRED
CAUTION
Advertisement
Table of Contents
