Grandstream Networks gTalk DP715 User Manual page 3

Hide thumbs Also See for gTalk DP715:

5. The number appears on the display wait for 4 seconds (Default "No Key Entry Timeout"); or press # to

dial the number directly (Use # as dial key" must be configured in web configuration).

6. To finish the call, press

or replace the handset in the base unit or the charger unit.

Answering Calls

The handset starts ringing during an incoming call; you have the following options to answer:

a. Press

to pick up the call.

b. Pick up the handset from the base or charger unit (Only if Auto Talk option is activated).

To finish the call, press

or place the handset in the base or the charger unit.

Call Hold

Place a call on hold by pressing the

"Recall" button on the Handset. Press the "Recall" button again

to release the previously held Caller and resume conversation.

Call Transfer

This function is applicable using the Handset for VoIP calls only. Assume that parties A and B are in

conversation. Party A wants to Attend Transfer B to C:

(

1. A press

RECALL) on the Handset for dial tone.

2. A then dials Caller C's number followed by # (or wait for 4 seconds).

3. If C answers the call, A and C are in conversation. Then A can hang up to complete transfer.

4. If C does not answer the call, A can press "flash" to resume call with Caller B.

3-Way Conference

Assume that parties A and B are in conversation. Party A wants to bring C into a 3-way conference:

1. A presses

(on the Handset) to get a dial tone.

Gtalk dp715/710