Panasonic PT-LB10NTU Service Manual page 19

3. Unscrew the 2 screws and remove the lamp unit terminal.
4. Unscrew the 2 screws and remove the exhaust fan and speaker
block.
5. Unscrew the 2 screws and remove the lamp house and
thermofuse attachmemt fittings.
6. Unscrew the 2 screws and remove the K-P.C.Board.
7.8. Removal of B / Q-Module
1. Remove the A-P.C.Board block according to the steps 1 through 6
in the section 7.3. "Removal of A-P.C.Board".
2. Unscrew the screws (PT-LB10NTU/E: 1, Others: 3) and remove the
grounding metal.
3. Unscrew the 2 screws and remove the lamp unit terminal.
PDF created with pdfFactory Pro trial version
19
www.pdffactory.com