Panasonic PT-LB10NTU Service Manual page 18

2. Remove the water guide plate.
3. Unscrew the 2 screws and remove the S1-P.C.Board.
7.6. Removal of S2-P.C.Board
1. Remove the S2-P.C.Board block according to the section 7.3.
"Removal of A-P.C.Board".
2. Remove the holder while expanding the resin hooks outside.
Note:
- Work carefully not to damage the resin hook.
7.7. Removal of K-P.C.Board
1. Remove the analysis block, LCD block and lens according to the
steps 1 through 3 in the section 7.11. "Removal of Analysis Block
and Lens".
2. Unscrew the screws (PT-LB10NTU/E: 1, Others: 3) and remove the
grounding metal.
PDF created with pdfFactory Pro trial version
18
www.pdffactory.com