4: Av1 Output Setting - Toshiba RD-85DTSB Owner's Manual

4: AV1 output setting

To select the video output type corresponding to your TV system. Be sure to make this setting if the recorder is
connected to your TV via the AV1(AUDIO/VIDEO)IN/OUT socket using a SCART cable.
Start
Note
• If the on-screen display disappears immediately after you select "RGB", you can restore it by connecting the recorder using
the VIDEO (yellow) jack.
RD-85DT_instE_26-29
1
Press SETUP if the setup menu is not displayed.
2
Press /
OK/ENTER.
3
Press
OK/ENTER.
4
Press
corresponding to your TV system, then press
OK/ENTER.
27
to select "Initial settings", then press
/ to select "AV1 output", then press
e.g.
Initial settings
Time & date setting Auto
Input signal PAL
Video
AV1 output
Video
AV2 input
Auto clock starts at 5:00 On
/ to select the video output type
Video : Select when connected to a normal TV.
S-Video : Select when connected to a TV compatible
with S-Video signals.
RGB : Select when connected to an RGB monitor.
• To exit the menu, press the SETUP button.
3/27/06, 17:43
Video
S-Video
RGB
27