Basic setup
D: Remote control settings
Perform this step according to your preference and usage.
Operating a TV with the remote control of this recorder
The remote control of this recorder has a function to operate a TV.
Entering a brand code into the remote control
1 While holding QUICK, press the number
buttons to enter a corresponding branc code
(see the next page) of your TV.
e.g. To enter 3491
Hold down.
2
Release QUICK.
The brand code is memorized.
34
RD-85DT_instE_30-39
QUICK
Number
buttons
34
Operating a TV with the remote control
Once you finished entering your brand code, you can
use the remote control to operate your TV as follows.
TV/DVD selector
1 Set the TV/DVD selector to "TV".
2 Point the remote control to your TV and press
the following buttons.
ON/STANDBY:
To turn on and off the TV.
INPUT SELECT:
To change the video input.
PROGRAM:
To select the TV channel.
VOLUME*:
To adjust the volume.
* Available independent of the TV/DVD selector.
3 After operating the TV, set the TV/DVD selector
back to "DVD".
3/27/06, 17:43
ON/STANDBY
INPUT SELECT
PROGRAM
VOLUME