Connecting A Satellite Receiver; By Using Scart Cable - Toshiba RD-85DTSB Owner's Manual

Connections

Connecting a satellite receiver

You can connect a satellite receiver to this recorder to enjoy watching or recording satellite programmes
through the recorder.

By using SCART cable

If both your TV and satellite receiver have a SCART input, use a SCART cable to connect the recorder.
Note
According to the type of the TV set that you are connecting, set the output for the AV1(AUDIO/VIDEO)IN/OUT socket.
( page 27)
For a satellite receiver
Where to connect:
Normally use the AV2(SAT/DECODER)IN/OUT socket as above. (Also the AV1(AUDIO/VIDEO)IN/OUT socket, the
RF IN (FROM ANT.) terminal, or the INPUT jacks on the front panel are also available.)
If you connect a satellite receiver to the AV2(SAT/DECODER)IN/OUT socket, make the following settings:
• "AV2 input" ( page 28)
18
RD-85DT_instE_13-20
UHF aerial
To AV2(SAT/DECODER)IN/OUT
SCART cable
(not supplied)
To SCART input
18
If you use the LINE AUTO function
SCART cable
(not supplied) (
to connect the recorder to a SCART
socket which is allocated for TV
connection.
Satellite receiver
To AV1(AUDIO/VIDEO)IN/OUT
TV
To aerial input
3/27/06, 17:42
page 49, OPERATIONS), be sure