Satellite Link - Toshiba D-KVR20KU Owner's Manual

You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner's manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
Preparation on this unit
• You must let the unit know which video input jack you
are using before making a recording.
Refer to "SETTINGS FOR THE VIDEO INPUT" on page 20.
42 42 EN EN
Downloaded From Disc-Player.com Toshiba Manuals
E9KGBUD_D-KVR20KU_EN.indd 42 E9KGBUD_D-KVR20KU_EN.indd 42

SATELLITE LINK

OPEN/ INPUT
CLOSE SELECT HDMI
.@/: ABC DEF
TRACKING
GHI JKL MNO
PQRS TUV WXYZ SAT.LINK SAT.LINK
TIMER TIMER
SPACE
PROG.
PROG.
SETUP DISPLAY AUDIO
DISC MENU TOP MENU
ENTER ENTER
CLEAR RETURN
INSTANT 1.3x/0.8x
TIME SLIP
SKIP PLAY
REV PLAY FWD
SKIP STOP STOP SKIP
PAUSE
VCR DVD
DUBBING REC MODE REC
REPEAT TIMER SET TIMER SET SEARCH ZOOM
SE-R0295
1
Press [SAT. LINK].
2
Use [K / L] to select the time, media
and recording mode, then press
[ENTER].
Satellite Link
DVD
Start Mode
VCR
12:00AM DVD XP
To Standby Mode
3
Use [K / L] or [the Number buttons]
to set the desired starting time, then
press [ ].
B
• The hour can be selected from 1 to 12 with AM
or PM.
• Repeat procedures in this step to set the
desired minutes.
• If you wish to go back to the left, press [{].
4
Use [K / L] to select a recording
media ("DVD" or "VCR"), then press
[ ].
B
5
Use [K / L] to select the recording
mode.
Refer to "Recording Mode" on page 33 for DVD
or "Recording" on page 99 for VCR.
2008/05/27 16:10:40 2008/05/27 16:10:40