Table of Contents
Advertisement
Troubleshooting the Installation
The slot 0 and slot 1 LEDs indicate which PCMCIA (Flash memory) card slot is in use, and each
LED blinks when the card is accessed by the system.
The RSP7000 is oriented horizontally in the Cisco 7010 router.
Note
The reset switch (see Figure 5) resets the RSP7000 and the entire system. To prevent
Caution
system errors and problems, use it only at the direction of your service representative.
Figure 5
RSP7000 LEDs, Cisco 7000 Orientation Shown
24 7000 Series Route Switch Processor (RSP7000) Installation and Configuration in the Cisco 7000 Series Routers
Advertisement
Table of Contents
