Table of Contents
Advertisement
Troubleshooting
Condition
The printing is blurred.
The color deviation appears on the
print.
The halftone representation is coarse.
The area around characters or the layer
areas appear uneven.
43
Confirm that the paper set (size, shape, and type) matches the paper
(size, shape, and type) configured by the application software or printer
driver.
Clean the print head. Refer to "Cleaning the Printhead" (User's Guide).
If you are using the printer at low temperature (Room temperature is
14 degrees Celsius (57 degrees Fahrenheit) or lower) :
Open the [Utility] tab in the printer driver and then select the [Low
Temperature Print Mode] in the [Special Settings].
Refer to "Changing the Special Settings of the Printer" (User's Guide).
Confirm that the paper set (size, shape, and type) that displays color
deviation matches the paper (size, shape, and type) configured by the
application software or printer driver is the same.
Adjust the position of the printhead.
Refer to "Adjusting the Printhead Position" (User's Guide).
Set the resolution to [Input resolution 1200dpi] (prioritize image
quality) and then print.
Refer to "Changing the Print Quality and Adjusting the Color" (User's
Guide).
If you have several printers, check that you have not changed the
printer and transport unit combinations. Because accurate adjustments
are made between each printer and its transport unit, it is not possible
to use a transport unit of another printer.
Open [Color] sheet of the printer driver, and set the [Half-tone] to [Error
Diffusion].
Refer to "Changing the Print Quality and Adjusting the Color" (User's
Guide).
Open the printer driver's [Color] sheet and set the [Half-tone] to [Error
Diffusion].
Refer to "Changing the Print Quality and Adjusting the Color" (User's
Guide).
Confirm that the paper set (size, shape, and type) matches the paper
(size, shape, and type) configured by the application software or printer
driver.
Solution
Advertisement
Table of Contents
