Table of Contents
Advertisement
Synology DiskStation at a Glance
No.
Article Name
1)
Power Button
2)
LED Indicators
3)
Hard Drive Trays
Hard Drive Tray
4)
5)
Power Port
6)
7)
USB 2.0 Ports
8)
USB 3.0 Ports
9)
10)
11)
RESET Button
12)
LAN Ports
-----
1
For more information about Synology Expansion Unit supported by your DiskStation, please visit
4 Chapter 1: Before You Start
Downloaded from
ManualsNet.com
Location
Front Panel
Front Panel
Front Panel
Front Panel
Locks
Back Panel
Fans
Back Panel
Back Panel
eSATA 1
Back Panel
eSATA 2
Back Panel
Back Panel
search engine
The power button is used to turn Synology DiskStation on or off.
To turn off Synology DiskStation, press the Power Button and hold it until you
hear a beep sound and the Power LED starts blinking.
The LED indicator is used to display the status of the internal disk and the
system. For more information, see "Appendix B: LED Indication Table" on Page
18.
The hard drive trays are designed for loading the hard drives used in
Synology DiskStation.
Each hard drive tray is equipped with one tray lock to lock or unlock the trays to
the DiskStation.
The power port is where you connect the power cord to Synology DiskStation.
The fans are built to exhaust waste heat out of Synology DiskStation. It will start
automatically when the server starts. If the fan is malfunctioning, the system will
play beep sounds every few seconds.
The Synology DiskStation offers USB ports for adding additional external hard
drives, USB printers, or other USB devices.
The eSATA ports are used to connect external SATA disks or Synology
1
Expansion Units
to Synology DiskStation.
1. To restore IP, DNS, passwords for the admin account to default value.
2. To reinstall the Synology DiskStation.
The LAN ports are where you connect RJ-45 cable to Synology DiskStation.
Description
www.synology.com
.
Advertisement
Table of Contents
