Table of Contents
Advertisement
5 Insert the loaded hard drive tray into the empty hard drive bay.
Important:
properly.
6 Press the handle in flush with the front panel to hold the hard drive tray in place.
7 Insert the hard drive tray key into the hard drive tray lock, turn the key clockwise (to the "I" position) to lock the
handle of the hard drive tray, and then remove the key.
8 Repeat the steps above to assemble the other hard disks you have prepared.
9 The disks' positions are numbered as shown below.
Note:
If you want to set up a RAID set, it is recommended that all installed hard disks are of the same size to make
the best use of hard disk capacity.
8 Chapter 2: Hardware Setup
Downloaded from
ManualsNet.com
Make sure the tray is pushed in all the way. Otherwise, the hard disk might not be able to function
search engine
Advertisement
Table of Contents
