Advertisement
1
Carry bag
2
Big base
3
Small base
4
Profiles set (A), (B) y (C).
4150.
Net Weight 18,9 Kg
Caution
Before assembling and installing this product, carefully read the following:
-At least two people are needed to install and desinstall the lamp.
-If the steel cable or the power cord of this lamp is damaged, it must be replaced only by the manufacturer or their technical service or by a person capacitated to this effect to avoid
any risk.
-We recommend reading the manual before installaing the lamp. Keep this instructions for future reference.
Halley
Design by Jordi Vilardell & Meritxell Vidal
SUPPLIED MATERIAL
TECHNICAL SPECIFICATIONS
1 x LED STRIP 24V 21,6W
1.
4150
1 un.
1 un.
1 un.
1 un.
2.
3.
Class I. Product with an additional protection cable (grounds).
Dust-tight product. Protected against water spray.
Product that CAN be in contact with normally-flammable
materials (wood or others).
4.
C
B
A
Advertisement
Table of Contents
Related Manuals for VIBIA Halley
Summary of Contents for VIBIA Halley
- Page 1 Halley Design by Jordi Vilardell & Meritxell Vidal ASSEMBLY INSTRUCTIONS SUPPLIED MATERIAL 4150 1 un. Carry bag 1 un. Big base 1 un. Small base 1 un. Profiles set (A), (B) y (C). TECHNICAL SPECIFICATIONS Class I. Product with an additional protection cable (grounds).
- Page 2 ASSEMBLY INSTRUCTIONS 1. Remove the top (A) and side (B and C) profiles from the carry bag. Place the big (D) and small (E) bases where you want to install the lamp. The distance between the center of the bases must be 2.10 mt.
Need help?
Do you have a question about the Halley and is the answer not in the manual?
Questions and answers