Download Print this page

Wash Cycle Table; Energy Saving Tips; How To Keep Your Dishwasher In Shape - Haier WQP12-HFE Installation Manual

Domestic dishwasher
Hide thumbs Also See for WQP12-HFE:

Advertisement

Energy Saving Tips

-
It is important to try and run the dishwasher when it is fully
loaded in order to save on energy. In order to prevent odours
from forming and food from caking onto the dishes, you can run
the hold cycle.
- Choose the right wash cycle: the choice of cycle depends on
the type of dishware, cookware and utensils being washed and
how dirty they are.

How to Keep Your Dishwasher in Shape

After Every Wash
After every wash, turn off the water supply to the appliance and
leave the door slightly ajar so that moisture and odours are not
trapped inside.
Remove the Plug
Before cleaning or performing maintenance, always remove the
plug from the socket. Do not run risks.
No Solvents or Abrasive Cleaning Products
To clean the exterior and rubber parts of the dishwasher, do not
use solvents or abrasive cleaning products. Rather, use only a
cloth and warm soapy water.
To remove spots or stains from the surface of the interior, use a
cloth dampened with water and a little white vinegar, or a clean-
ing product made specifically for dishwasher.
- Use the right amount of detergent: if you use too much detergent,
the result will not be cleaner dishes, but, rather, a greater nega-
tive impact on the enviroment.
- There is no untility in rinsing dishes, cookware and untensils
before placing them in the dishwasher.
Moving the Appliance
If the appliance must be moved, try to keep it in the vertical position.
If absolutely necessarty, it can be positioned on its back.
Seals
One of the factors that cause odours to form in the dishwasher is
food that remains trapped in the seals. Periodic cleaning with a
sponge will prevent this from occuring.
When You Go on Holiday
When You go on holiday, it is recommended that you run a wash
cycle with the dishwasher empty and then remove the plug from
the socket, turn off the water supply and leave the door of the
appliance slightly ajar. This will help the seals last longer and pre-
vent odours from forming within the appliance.
.7.

Wash Cycle Table

Cycle Selection
Cycle
Information
Very dirty dishes, pots and
pans. (not to be used with
delicate items)
Heavy Duty
Normal dirty dishes, pots
and pans. standard daily
Normal Wash
cycle.
(IEC-EN50242)
Economic, fast cycle to be
used on not very dirty dishes
right after they are used. No
Rapid Wash
drying cycle.
Economic, fast cycle to be
used for items which are sen-
sitive to higher temperatures.
Glass ware
Run immediately after dishes
are used.
Pre-wash of dishes, pots and
pans while waiting for the load
to be completed after the sub-
Soak
sequent meal.
GB
GB
Desciption of Cycle
Detergent
Pre-wash with hot water at 40
.
Extended wash at 70
.
Rinse with cold water.
30g
Rinse with hot water at 65
.
Drying.
Pre-wash with cold water.
Extended wash at 55
.
30g
Rinse with hot water at 60
.
Drying.
Short wash at 40
.
15g
Cold rinse .
Wash at 55
.
Rinse with warm water.
15g
Hot rinse at 65
.
Drying.
Short cold wash to prevent food
residue from drying on the dishes .
.8.
Rinse Aid

Hide quick links:

Advertisement

loading