Haier WQP12-ABM User Manual

Domestic dishwasher

Advertisement

Quick Links

Installation
Electrical,drain and
water supply line en-
trances must be con-
fined to shaded areas
to avoid interference
with components.
Most of the installation work should be done be-
fore the dishwasher is moved into place .First,se-
lect a location as close to the sink as possible for
ready access to water and drain lines. For proper
operation and appearance of the dishwasher,the
cabinet opening should be square and have dimen-
sions as shown in Fig. 1.lf the dishwasher is to be
installed in a corner,there must be sufficient clear-
ance to open the door as shown in Fig. 2.A mini-
mum clearance of 2" is recommended.
Rough-in the water,electrical,and drain lines before
proceeding with the installation. The lines should
run straight to their connections on the dishwasher.
Note:Make sure that the lines do not cross in
front of the dishwasher motor or its legs.
600mm
Fig.1.
600mm
Fig.2.

Advertisement

Table of Contents
loading

Summary of Contents for Haier WQP12-ABM

  • Page 1 Fig. 1.lf the dishwasher is to be installed in a corner,there must be sufficient clear- ance to open the door as shown in Fig. 2.A mini- mum clearance of 2"...
  • Page 2: Installation

    Anti-Flooding Protection nets or wall.The dishwasher is equipped with The dishwasher is equipped with a system that water supply and drain hoses that can be po- stops the supply of water in the event of a prob-...
  • Page 3: Cleaning And Special Maintenance

    Troubleshooting It may occur that the dishwasher does not function or dows not function properly.Before calling for assistance,Iet us see what can be done first:have you forgot to press one of the...
  • Page 4: Wash Cycle Table

    When You Go on Holiday When You Go on Holiday,it is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from the socket turn off the water supply and leave the door of the appliance slightly ajar.This will help the...
  • Page 5: Turing On The Appliance

    Energy Saving Tips It is important to try and run the dishwasher when it is fully loaded to save on enery.In order to prevent odors from forming and food from caking onto the dishes,you can run the hold cycle.
  • Page 6: Detergent And Rinse Aid

    Pull out the rack to facilitate loading the dishwasher. How to Use the Lower Rack We recommend that you place the most difficult to clean items on the bottom rack:pots ,lids,serving dishes and bowls,as shown in the figure to the right.
  • Page 7: Close-Up View (Interrior)

    To prevent the formation of rust,load the salt just before begining a wash cycle. Adjusting Salt Consumption The dishwasher is designed to allow for ad- justing the amount of salt consumed based on the hardness of the water used.This is...
  • Page 8: Safety Is A Good Habit To Get Into

    - Only specialised personnel are authorised doubt,contact a qualified professional. to make repairs. - The dishwasher must only be used by - Appliances which are no longer being used adults for the washing of household dishes must be made inoperable by cutting the and cooking utensils.
  • Page 9: Table Of Contents

    Installation Domestic Dishwasher WQP12-ABM CONTENTS Safety Is a Good Habit to Get Into ○ ○ ○ ○ ○ ○ Close-up View (control panel) ○ ○ ○ ○ ○ ○ ○ ○ ○ Close-up View (Interrior) ○ ○ ○ ○ ○...

Table of Contents