Panasonic RG-C1315LA Installation Instructions Manual page 8

INSTALLATION (RETROFIT) (CONTINUED)
2
Secure the fan body to Flex-Z Fast™ bracket by using
2 self-drilling screws.
3
Plug connector into receptacle and secure fan body to
adaptor by using machine screw (M4X8).
Please take care when installing the machine screw
(Step 5) to avoid cross threading and to ensure that
the screw does not strip or come in contact with
Flex-Z Fast™ bracket.
Sealing
1
Once fan body is mounted and secure, fill gap between flange
and ceiling with caulk or other sealant to prevent air leakage.
2
Adjust Pick-A-Flow™ switch. (Refer to explanation under
FEATURES). (Page 5)
Install grille
1
Insert the grille mounting spring on the wiring
side into the slot and insert the plug connector
into the housing of the lighting unit.
2
Insert the mounting springs into the slot as
shown to mount grille to fan body.
Before turning on the light, make sure the
connector is at the correct position. If not,
the lighting unit can't work.
Mount grille carefully so that the lead wire is
not pinched.
The claw of connector must latch onto the rib
completely.
3
Joist
1
Drywall
Grille
2
Machine screw
(M4X8)
2
2 self-drilling
screws
1
Drywall
Mounting spring
Lighting unit
Mounting spring
Joist
Gloves
8