Procedure To Remove Drain Pump And Float Switch - Daikin FBQ71DVET Service Manual

Procedure to Remove Drain Pump and Float Switch

6. Procedure to Remove Drain Pump and Float
Switch
Procedure
Step
1. Removal of service lid (1)
assembly
1 Remove the 5 screws
to dismount the service
lid (1) assembly.
2. Removal of drain pump
1 Cut the cable tie and
pull out the drain hose.
Remove the 2 screws
2
with washers to
dismount the drain
pump.
3. Removal of float switch
Remove the single
1
screw and slide the
float switch.
8
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Drain hose
Cable tie
Fixing screw
Service lid (1)
<Removal>
•
<Attachment>
1. Attach the lid after checking
2. Check that the wires are not
3. Open the inspection port
Drain pump
Screw
Float switch
Si281313E
Points
Precautions for the removal
and attachment of the
service lid (1)
Check that the wires are not
twisted or get tangled.
that the wires are not twisted
or tangled.
caught between the lid (1)
and side plate.
after attachment work, and
check that the wires are not
in contact with or caught by
the float and that the float
operates normally.
(Otherwise, repeat
inspection steps 1 through
3.)
Removal Procedure