Advertisement
Step: 2
Orient and Align the Kick Stand Sensor
Guard, as shown, and Slip-in the OE
screw through the Mounting hole in
the Guard and secure the threads in
the Sensor Housing, as shown in Red
Colour.
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step: 1
Unscrew the OE Mounting
Bolt holding the Sensor in its
place.
The same screw will be used
for mounting the Sheet Metal
Guard.
Step: 3
Lead the Cable tie – 2 off, as
shown, and inserting them
into the slots in the Guard, tie
it around the Stand stem.
SRC Kick Stand Sensor Guard
protects the, sensor, its mount
and the sensor connector, as
shown.
Final mounted condition of the
Sensor Guard is as shown.
Page 3
Advertisement
