SPL Phonitor xe Quick Start Manual page 2

Phonitor xe – Quickstart
Start up
Read the security advices on page 9!
2 Make sure that the selected mains voltage of the Phonitor xe is according to the
mains voltage of your region.
Make sure that the mains switch on the rear of the Phonitor xe is set to Off
(Off = O / On = I).
The standby switch on the front panel has to be set to
Connect the supplied power cord to the Phonitor xe and an appropriate mains
socket outlet.
If the supplied power cord does not match your mains socket outlet, please contact your dealer.
6
Turn off all devices you wish to connect to the Phonitor xe.
Connect the outputs of your analog sources (e.g. CD Player, Phonos) to the
analog inputs of the Phonitor xe. Please use appropriate audio cables (XLR,
RCA).
Audio cables not included in the scope of delivery.
If the DA converter option is fi tted connect the outputs of your digital sources
(e.g. Mac, PC or CD Player) to the digital inputs of the Phonitor xe. Please use
appropiate audio cables (USB, coaxial, optical, XLR).
Digital audio cables not included in the scope of delivery.
For Windows ® computers download the latest driver from spl.audio and have it installed. Macs, iPhones and iPads
do not require a driver since the USB port is Apple-Class compliant.
Connect your headphone to the balanced or standard headphone output of the
Phonitor xe – either on the front or on the rear.
To protect the headphone power amplifi er stage and guarantee a long and consistent performance please note:
• Turn down VOLUME before swapping headphones.
• Never insert a mono jack plug into the front panel stereo jack.
• Make sure that the headphones stereo jack is fully inserted.
• If you use an adapter from 3,5 mm to 1/4" (6,35 mm) on your headphone make sure that the adapter is fully
screwed on respectively fully plugged in.
2
(standby).
Mains Voltage
Mains Switch
Analog Audio Inputs
Voltage Selection:
1. Remove Fuse Holder
2. Exchange Fuses
3. Flip Over 4. Reinstall
Fuses: 230V AC: T 500 mA L 250 V
AVIS: RISQUE DE CHOC ÉLECTRIQUE • NE PAS OUVRIR
115V AC: T 1 A L 250 V
~ 115V AC / ~230V AC, 50 Hz / 60 Hz, P max. 45 W
L
Phonitor xe
IR
PGM R
Serial
Number
Balanced Standard
Refer to
Manual
Made in Germany HEADPHONES OUTPUTS
Mains Connector
Standard Headphone Connection
Balanced Headphone Connection
Balanced Headphone Connection
Phonitor xe
Off On
MATRIX
USB Coax
RCA Optical
XLR AES
Stereo
Mono
MODE
VOLTAiR
120V DC Audio Rail
Phonitor xe – Quickstart
Digital Audio Inputs
optional
C A U T I O N DIP SWITCHES W I R I N G
RISK OF ELECTRIC SHOCK ON BOTTOM SIDE: XLRs: balanced, Pin 2 = Hot (+)
D O N O T O P E N For unbalanced operation
1 ON: HP Out +22dB
bridge Pin 3 to GND.
2 ON: RCA -10dBV to 0dBu
RCAs: Unbalanced, Tip = Hot (+)
COAX
R L
AES OPTICAL USB
ANALOG SOURCES DIGITAL SOURCES
Standby Switch
Standard Headphone Connection
ON
VU
+6
0 +12 F R
Balanced Standard
Headphone Amplifier
EN
DE
3