Table of Contents
Advertisement
No.
The data on the disk that you are using
00
is for a different product.
An error has occurred while the disk was
loading.
01
Please try again!
There is no disk in the Disk Drive.
02
03
The file that you tried to load is empty.
An error has occurred while the disk was
05
saving.
Please try again!
The disk that you are using is write
protected.
06
Please remove the write protection and
try again.
The disk that you are using is full. Please
07
use another disk.
An error has occurred while the disk was
formatting. The disk that you are using
08
may be faulty.
Please try formatting another disk.
10
The data is already copy protected.
15
The song you are trying to save is empty.
This STANDARD MIDI FILE is incom-
16
patible with this instrument and cannot
be loaded.
17
This is not a STANDARD MIDI FILE.
The timebase (PPQ resolution) that you
18
tried to load is not 24/48/96/192/288/384
PPQ.
A problem has occurred with your
SEQUENCER Data.
20
This might be due to a damaged or faulty
disk.
Memory full
21
It is necessary to press REC STOP to
22
complete this procedure.
It is impossible to change the time
signature because it has already been
23
set in the existing tracks.
A rhythm track already exists. It is
impossible to assign two tracks to
24
rhythm.
It is only possible to change the velocity
on a melody track.
25
Contents
No.
It is only possible to merge melody
tracks.
26
Tracks such as rhythm, chord and
control cannot be merged.
It is only possible to copy melody tracks.
Tracks such as rhythm, chord and
27
control cannot be copied.
This song is too long to be saved as a
28
MIDI file.
The MIDI file that you have tried to load
exceeds the memory capacity of this
instrument and cannot be played. The
29
SEQUENCER
cleared.
It is not possible to change the time
signature of a COMPOSER pattern after
30
it has been recorded. If you want to
proceed, you must first clear the entire
COMPOSER pattern.
The time signature of the pattern from
which you are copying is different from
the COMPOSER memory that you are
using.
31
Either: Change the time signature
of the COMPOSER memory
or:
Copy from a pattern that has
the same time signature
Memory full
32
Select
a
33
parameters
RECORD.
The file that you are trying to load was
saved on a previous KN keyboard. It is
43
only
possible
"PERFORMANCE" option.
It is impossible to edit a Drum Kit. Please
44
select a different sound from any group
except Keyboard Percussion.
It is only possible to insert MELODY
Tracks. Tracks such as RHYTHM,
46
CHORD and CONTROL cannot be
inserted.
This procedure is not possible with a
47
composer pattern or the metronome.
Please select a preset rhythm pattern.
It is not possible to record using preset
banks, compile banks, or control banks.
54
Please select one of the user banks.
Contents
memory
has
Track
before
setting
for
AUTO
PUNCH
to
load
using
been
the
Advertisement
Table of Contents
