Technics SX-KN6500 Service Manual page 13

- Follow the item 11.1..
- Pull out the connectors on the DISPLAY panel.
STEP 1: Removing the gear rails
1. Remove the gear rail mounting screws (
Fig.6 and Fig.7
2. While pulling the rod to release it from the gear rail, pull the gear
rail.
STEP 2: Removing the fixing axes
- Remove the fixing axis mounting screws (
Fig.8 .
.
Fig.6
8 pcs.) as shown in
Fig.7
2 pcs.) as shown in
Fig.8
13