Philips AVENT SCD630 Manual page 9

Preparing for use
Baby unit
Parent unit
1
Eco 20°C
3 hrs = 10 hrs
Put the power adapter in the baby unit and the adapter in the wall socket.
The parent unit runs on a built-in rechargeable Li-ion battery.
Follow the below steps to charge the parent unit:
1 Put the power adapter in the parent unit and put the adapter in the wall
socket.
- The battery status light turns orange to indicate that the appliance is
charging.
- When the battery is fully charged, the battery status light turns green
continuously.
- When you charge the parent unit for 3 hours, it can be used cordlessly for
approx. 10 hours.
- If the parent unit is switched on during charging, charging takes
approximately twice as long.
9
English