Cleaning Of The Unit; Specifications - IMG STAGELINE MULTI RAY LED-812DMX Instruction Manual

Led dmx light effect unit
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 8
2) Adjust the number of DMX channels with DIP switch
No. 10. The number of DMX channels depends on
the functions required and may also depend on the
number of available control channels. Please refer
to chapter 9.1 for information on the corresponding
functions available in the 1-channel and 3-channel
mode and select the number of DMX channels
accordingly:
Fig. 9 Control via 3 DMX channels
Switch No. 10 set to OFF
Fig. 10 Control via one DMX channel
Switch No. 10 set to ON
3) After adjusting the start address and the number of
DMX channels, the light effect unit can be operated
via the DMX controller. Once DMX signals are
received, the red indicating LED (3) will start flash-
ing.

8 Cleaning of the Unit

The six lenses should be cleaned at regular intervals,
depending on impurities caused by dirt, smoke or other
particles. Only this will ensure that the light is radiated
at maximum brightness. For cleaning, disconnect
the mains plug from the socket. Only use a soft,
clean cloth and a glass cleaner.
For cleaning the other parts of the housing, only use
a soft, clean cloth. Never use any fluid; it may leak into
the unit and cause damage.

9 Specifications

Power supply: . . . . . . . . . 230 V~ / 50 Hz
Power consumption: . . . . 45 VA
Light source: . . . . . . . . . . 1 × RGBW LED, 10 W
Ambient temperature: . . . 0 – 40 °C
Dimensions: . . . . . . . . . . . 220 × 195 × 170 mm
Weight: . . . . . . . . . . . . . . . 2.9 kg
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
(red, green, blue, white)
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
®
9.1 DMX channels
1-channel mode
DMX value
Function
0 – 14
light off
15 – 124
rotation
125 – 139
no rotation
rotation
140 – 249
250 – 255
music control via the microphone (4)
3-channel mode
DMX value
Function
Channel 1: dimmer/stroboscope
0 – 7
light off
dimmer: dark → bright
8 – 199
stroboscope: slow → fast
200 – 247
248 – 255
maximum brightness
Channel 2: colour
0 – 7
colour 1 (green)
8 – 15
colour 2
16 – 23
colour 3
...
...
248 – 255
colour 32 (white)
Channel 3: rotation
0 – 9
Stop
fast → slow
10 – 120
121 – 134
Stop
slow → fast
135 – 245
246 – 255
Stop
Subject to technical modification.
: fast → slow
: slow → fast
GB
11

Advertisement

Table of Contents
loading

Table of Contents