Declaration Of Conformity - Worx PROFESSIONAL WU756 Manual

PLUG REPLACEMENT
( UK & IRELAND ONLY )
If you need to replace the fitted plug then follow
the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
BLUE =NEUTRAL
Brown = Live
As the colors of the wires in the mains lead
of this appliance may not correspond with the
colored markings identifying the terminals in
your plug, proceed as follows. The wire which is
colored blue must be connected to the terminal
which is marked with N. The wire which is
colored brown must be connected to the terminal
which is marked with L.
WARNING! Never connect live or neutral wires
to the earth terminal of the plug. Only fit an
approved 13ABS1363/A plug and the correct
rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed to
prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
8
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product
Description WORX Car polisher
Type WU756 (7-designation of machinery,
representative of Sander and Polishers other
than disk-type)
Function Polishing
Complies with the following Directives,
2006/42/EC
2006/95/EC
2004/108/EC
Standards conform to
EN 60745-1
EN 60745-2-4
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
The person authorized to compile the technical
file,
Name Russell Nicholson
Address Positec Power Tools (Europe)Ltd, PO
Box 152,Leeds,LS10 9DS,UK
2014/10/11
Yujin Tang
POSITEC Quality Manager