Assembly And Operation; Maintenance - Worx PROFESSIONAL WU756 Manual

SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Double insulation
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products must
not be disposed of with house-
hold waste. Please recycle where
facilities exist. Check with your local
authorities or retailer for recycling
advice.
OPERATING INSTRUCTIONS
Note: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for polishing floor, car
and other coated surfaces.

ASSEMBLY AND OPERATION

Action
ASSEMBLE
Assemble the Handle
Assemble the Polishing Disc
OPERATION
Spread The Polish
Operating The On/Off Switch
Using The Variable Speed Dial
HAND GRIP AREAS
Warning: Always hold your
car polisher firmly with both
hands when operating.
TO USE THE CAR POLISHER
FINAL WORK
Warning: Use long, sweeping
strokes in a criss-cross pattern to
bring out the shine. Do not over-
press the polisher.

MAINTENANCE

Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication
or maintenance. There are no user serviceable
parts in your power tool. Never use water or
chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of dust.
Occasionally you may see sparks through the
ventilation slots. This is normal.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
Figure
See Fig. A
See Fig. B
See Fig. C
See Fig. D
See Fig. E
See Fig. F
7