Worx Professional WU652 Manual page 5

Accessories
Dust bag with adaptor
•
120grit velcro sanding paper
•
1(125mm for WU652,150mm for WU655)
We recommend that you purchase your accessories from the same
store that sold you the tool. Use good quality accessories marked
with a well-known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and offer advice.
Additional safety points for your
rotary sander
1
1
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
2
Fully unwind cable drum extensions to avoid potential overheating.
3
When an extension cable is required you must ensure it has the
correct ampere rating for your power tool and is in a safe electrical
condition.
4
Ensure your mains supply voltage is same as indicated on the
rating plate.
5
Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
6
Always check walls, floors and ceilings to avoid hidden power
cables and pipes.
7 After long working periods external metal parts and accessories
could be hot.
8
Wear eye protection when operating this tool.
9 If possible, ensure the workpiece is firmly clamped to prevent
movement.
10
Your sander is a hand held tool, do not clamp your finishing sander.
11 Before sanding, check the area is free of nails, screws, etc.
12
Never stop the sander by applying a force to the baseplate.
13
Only use paper in good condition. Do not use torn or worn paper.
14 Do not sand material containing asbestos due to a health risk.
15
Do not sand lead based paint due to the risk of lead poisoning.
16
Do not eat or drink in the working area of the sander.
17 Do not allow people to enter the working area without wearing a
dust mask.
5