Haier AB142ACBBA Operation Manual page 12

Guide to Operation
S E T
A M
COOL operation starts
when room temp.is
higher than temp.
setting.
Temp. setting +2 C
Temp.setting
On reaching temp.setting
+2 C, unit will run in mild
DRY mode.
Unit runs at the speed displayed on LCD.
In HEAT mode, warm air will blow out after a short
period of time due to cold-draft prevention function.
In DRY mode, when room temp. becomes 2 C
higher than temp. setting, unit will run intermittently
at LOW speed regardless of FAN setting.
About Auto operation
In Auto operation, the air conditioner will
automatically choose Cooling, Heating or
Fan mode according to the room temperature.
Hints:
The wire controller can memorize the working condition of each time. When start the unit
for the next time, just need to press ON/OFF button, the air conditioner will work according
to the previous working mode. (except for Timer, Sleep and Swing)
M O D E F A N S W I N G
4
2
T E M P
C L O C K S E T
3
T I M E R S L E E P
F I L T E R R E S E T
R E S E T
ON/OFF
1
5
Ultra-low air flow
AUTO run, COOL , HEAT and DRY
Operation
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display
( except for Timer, Sleep, Swing mode). Power
indicator lights up.
(2) Select operation mode
Press MODE button. For each press, operation
mode changes as follows:
AUTO COOL
Then select AUTO run or select COOL operation or
select DRY operation or select HEAT operation
(3) Select temp. setting
Press TEMP button
Every time the button is pressed, temp. setting
increases 1 C.
If button is kept depressed, temp.setting will
increase quickly.
Every time the button is pressed, temp. setting
decreases 1 C.
If button is kept depressed, temp. setting will
decrease quickly.
Set proper temperature
(4) Fan speed
Press FAN button. For each press, fan speed
changes as follows:
LOW
MID
Set proper fan speed
(5) Unit stop
Press ON/OFF button.
Only clock and room temp remains on LCD.
10
DRY HEAT FAN
AUTO
AUTO
HIGH