Specifications; Ec Declaration Of Conformity - Dolmar AG-3750 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Capacities
Overall length
Battery cartridge
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Take particular care and attention.
Read instruction manual.
Keep a hand away from rotating parts.
Keep bystanders away.
Wear eye and ear protection.
Do not expose to moisture.
Only for EU countries
Cd
Ni-MH Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material! In observance of the European
Directives, on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for blowing dust.
Noise
The typical A-weighted noise level determined accord-
ing to EN50636:
Sound pressure level (L
Uncertainty (K) : 1.8 dB (A)
Sound power level (L
Uncertainty (K) : 2.3 dB (A)
Wear ear protection
Model
Air volume (max.)
Air speed
(without long nozzle)
(with long nozzle)
Net weight
) : 79.1 dB (A)
pA
) : 93.5 dB (A)
WA
AP-183, BL1815N, BL1820, BL1820B, BL1830, BL1840, BL1850,
BL1830B, BL1840B, BL1850B, BL1860B
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN50636:
Work mode : operation without load
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may
also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to pro-
tect the operator that are based on an estimation of exposure
in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
CORDLESS BLOWER SAFETY
WARNINGS
Training
1. Read the instructions carefully. Be familiar with the
controls and the correct use of the blower.
2. Never allow children, persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge or people unfamiliar
with these instructions to use the blower. Local
regulations may restrict the age of the operator.
4 ENGLISH
AG-3750
3
13.4 m /min
54.0 m/s
585 mm
830, 880, 930 mm
3.5 - 4.2 kg
D.C. 36 V
2
) : 2.5 m/s or less
h
2