Fig.26
NOTICE:
Make sure the hooks on the filters are set at the
•
correct position.
Cleaning the level sensors
Fig.27
The level sensors detect liquid when the tank becomes
full with liquid. Clean the level sensors with a soft cloth
from time to time when changing the air filters.
Cleaning the air filters
Clogged filter causes poor suction performance.
Clean out the filters from time to time.
To remove dust or particles adhering to the filters,
remove the prefilter from the air filter. And tap the
prefilter several times.
Fig.28
Occasionally wash the powder filter in water, rinse and
dry thoroughly in the shade before use. Never wash
filters in a washing machine.
NOTE:
Do not rub and scratch the powder filter, the
•
prefilter, or damper with hard objects such as a
brush and a paddle.
The filters are consumable and are recommended
•
to have some spares for them.
Storage of power supply cord
Fig.29
Fig.30
Wind up the power supply cord around the multi-hook or
the base hook.
Storage of accessories
NOTE:
Do
not
apply
•
accessories that are held by the pipe holder.
Applying an excessive force to these accessories
may cause damage to the pipe holder.
Fig.31
Pipe rest can be used to store straight pipe, bent pipe
and others by just inserting these accessories.
Fig.32
The pipes can be placed into the pipe holder when also
stopping using the cleaner on the way for a while.
Fig.33
You can place the cap in multi hook while the hose is
connected to the tool.
an
excessive
force
Storage of hose
Fig.34
Fig.35
The hose can be placed on either base hook or multi-
hook.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
These
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Hose
•
Front cuffs (22, 24, 38)
•
Straight pipe
•
Corner nozzle
•
Round brush
•
Powder filter
•
Damper
•
Prefilter
•
Nozzle assembly
•
Bent pipe
•
Polyethylene bag
•
Filter bag
•
Hose band
•
Belt hook complete
•
Cap
•
NOTE:
to
the
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
11
accessories
or
attachments
persons.
Only use
are
accessory or