Assembly Instructions - Kärcher K 5 Premium Full Control Plus Operator's Manual

Assembly
Illustrations on Page 3
Mount loose parts delivered with appli-
ance prior to start-up.
You will need the 2 included screws as
well as a Philips screwdriver PH 2.
Install wheels
Illustration
Secure the wheels using the includ-

ed plug. Align the plug properly!
Insert the cover and screw in.

Installing the base
Illustration
Insert base.

Insert the included dowels all the way

into the holes.
Secure the base with the enclosed

screws.
Install storage for spray lance
Illustration
Hook in storage for spray lance.

Secure the storage for the spray

lance by means of two screws.
Install the transport handle
Illustration
Attach the transport handle.

Secure the transport handle by

means of two screws.
Attach the net to the accessory
compartment
Illustration
Hook the net into the hooks shown in

the illustration.
Coupling of the high-pressure
Before initial startup, the high-
pressure gun must be coupled
to the high-pressure cleaner.
Insert the mains plug into

the socket.
Within one minute, simulta-

neously press the + and - buttons on
the high-pressure gun.
Hold down the buttons until the entire

signal strength symbol flashes.
Once coupling is complete, all six
pressure levels will be displayed.
Note: You can find a detailed descrip-
tion of the coupling here: https//
www.kaercher.com/FCR
gun
English 9