Table of Contents
Advertisement
Reconnecting a Headset or Car Kit
Normally, you can easily reconnect your headset by
switching on Bluetooth on your phone, and turning on
the headset. However, you might have to connect
manually if your headset has been used with another
Bluetooth device.
1.
Make sure that the headset is set to discoverable.
2.
Press
and tap
3.
Tap
Settings > Bluetooth
4.
If Bluetooth switch is off, tap it to turn on Bluetooth.
5.
Tap the headset's name in the Bluetooth devices
section.
6.
If prompted to enter a passcode, try 0000 or 1234,
or consult the headset or car kit documentation to
find the passcode.
If you still cannot reconnect to the headset or car kit,
follow the instructions in "Disconnecting From a
Bluetooth Device", and then follow the instructions in
"Connecting a Bluetooth Headset or Car Kit" on page
77.
78
2H. Bluetooth
.
.
Disconnecting From a
Bluetooth Device
To disconnect a Bluetooth device:
1.
Press
and tap
2.
Tap
Settings > Bluetooth
3.
On the list of Bluetooth devices, tap the device to
disconnect from it. Tap the device again on the list
to connect to it.
To unpair from a Bluetooth device:
You can make your device forget its pairing connection
with another Bluetooth device. To connect to the other
device again, you may need to enter or confirm a
passcode again.
1.
Press
and tap
2.
Tap
Settings > Bluetooth
3.
On the list of Bluetooth devices, press and hold the
device to unpair.
4.
Tap
.
delete
.
.
.
.
Advertisement
Table of Contents
