Reconnecting A Headset Or Car Kit - HTC Merge User Manual

 Bluetooth
2.
If Bluetooth is not switched on, tap the Bluetooth check box to
switch it on.
3. Make sure that the headset is discoverable, so that your phone
can find the headset. Refer to the instructions that came with the
headset to find out how to set it in discoverable mode.
4. Tap Scan for devices. Your phone will start to scan for Bluetooth
devices within range.
5. When you see the name of your headset displayed in the
Bluetooth devices section, tap the name. Your phone then
automatically tries to pair with the headset.
6. If automatic pairing fails, enter the passcode supplied with your
headset.
The pairing and connection status is displayed below the hands-
free headset or car kit name in the Bluetooth devices section. When
the Bluetooth headset or car kit is connected to your phone, the
Bluetooth connected icon
on the type of headset or car kit you have connected, you can then
start using the headset or car kit to listen to music and/or make and
receive phone calls.

Reconnecting a headset or car kit

When you have paired a headset with your phone, you should be able
to reconnect it automatically by turning on Bluetooth on your phone,
and then turning on the headset. However, sometimes you will need to
reconnect manually, for example if you have been using your headset
with another Bluetooth device.
1. Press HOME
networks > Bluetooth settings.
2. If Bluetooth is not switched on, tap the Bluetooth check box to
switch it on.
is displayed in the status bar. Depending
> MENU, and then tap Settings > Wireless &