Capturing A Video - HTC Arrive User Manual

Camera Flash FAQ
Why doesn't the Camera flash turn on?
The flash quickly consumes battery power. To save
battery power, the camera disables the flash (even
when you have set the camera flash mode to
or ) when one of the following occurs:
Flash on
You have an incoming call.
temporarily when you have an incoming call. After
the call ends, you'll be able to use the flash again. If
you have set the flash to
after you answer and end the call.
Your device's battery level reaches 20% or lower.
Recharge the battery so that the camera can have
enough battery power to use the flash.
Cold weather may lower battery performance which
affects the flash. To make sure the camera has
enough battery life to power up the flash, keep your
device warm. When not in use, put the device inside
your jacket to keep it warm, and try to avoid sudden
temperature changes that may affect battery
performance.
Auto flash
The flash will be disabled
, it turns back on
Flash on

Capturing a Video

1.
On the Start screen, tap
or press the camera button on the lower right side
of the device.
2.
On the viewfinder screen, tap
mode.
To adjust the zoom before you record the video,
press + to zoom in or - to zoom out.
To adjust the video settings before you record the
video, tap and then select settings such as
video light mode and resolution.
3.
Frame your subject on the screen.
4. Press the camera button to start capturing video.
Press it again to stop capturing.
Your device will automatically save the video and
return to video mode.
For options on the video you just captured, swipe
the screen from left to right and press and hold
the video.
2G. Camera & Multimedia
, and then tap Camera ,
to switch to video
67