Bosch GCL 25 Professional Original Instructions Manual page 16

16 | English
Roughly align the tripod before switching on the measuring
tool.
Securing with the universal holder (accessory)
Using the universal holder (15), you can secure the measur-
ing tool on vertical surfaces, pipes or magnetizable materi-
als, for example. The universal holder is also suitable for use
as a building tripod and facilitates height adjustment of the
measuring tool.
Roughly align the universal holder (15) before switching on
the measuring tool.
Working with the measuring plate (accessory) (see
figures A–B)
The measuring plate (14) can be used to project the laser
mark onto the ground and/or the laser height onto a wall.
The offset to the desired height can be measured using the
zero field and the scale, and can be projected at another
point. This means that you do not need to precisely adjust
the measuring tool for the height you want to project.
The measuring plate (14) has a reflective coating that en-
hances the visibility of the laser beam at greater distances
and in intense sunlight. The brightness intensification can
only be seen if you view the measuring plate with your line of
sight parallel to the laser beam.
Working with the Laser Target Plate
The laser target plate (13) improves visibility of the laser
beam in unfavourable conditions and at greater distances.
The reflective half of the laser target plate (13) improves vis-
ibility of the laser line. The transparent half enables the laser
line to be seen from behind the laser target plate.
Laser Viewing Glasses (Accessory)
The laser viewing glasses filter out ambient light. This makes
the light of the laser appear brighter to the eye.
Do not use the laser goggles as protective goggles.
u
The laser goggles make the laser beam easier to see; they
do not protect you against laser radiation.
Do not use the laser goggles as sunglasses or while
u
driving. The laser goggles do not provide full UV protec-
tion and impair your ability to see colours.
Example applications (see figures C–F)
Examples of possible applications for the measuring tool can
be found on the graphics pages.
Always place the measuring tool close to the surface or edge
that needs to be checked, and allow it to level in before the
beginning of any measurement.
Always measure the distances between the laser beam and a
surface or edge at two points that are as far from each other
as possible.
Maintenance and Servicing
Maintenance and Cleaning
Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
1 609 92A 4HF | (20.08.2018)
Wipe off any dirt using a damp, soft cloth. Do not use any de-
tergents or solvents.
The areas around the outlet aperture of the laser in particular
should be cleaned on a regular basis. Make sure to check for
lint when doing this.
Only store and transport the measuring tool in the case (18).
If the measuring tool needs to be repaired, send it off in the
case (18).
After-sales service and advice on using products
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or ar-
range the collection of a product in need of servicing or re-
pair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Bosch Power Tools