Melitta Passione OT Operating Instructions Manual page 41

Care and maintenance
Inserting the water filter
Information
Place the water filter into a vessel filled with fresh tap water for a few min-
utes before inserting it.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Insert filter menu.
3. Select Start using the arrow buttons and confirm with "menu/ok".
4. Follow the further instructions on the display.
» The water hardness is automatically set to Soft.
» The ready symbol appears on the display.
Changing the water filter
Change the water filter when the appliance requests you to do so.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Change filter menu.
3. Select Start using the arrow buttons and confirm with "menu/ok".
4. Follow the further instructions on the display.
» The ready symbol appears on the display.
Removing the water filter
The water filter should not be left standing dry for a long period of time.
When it is not used for a long time, we recommend storing the water filter
in a vessel filled with tap water in the refrigerator.
Remove the water filter as follows:
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Remove filter menu.
3. Select Start using the arrow buttons and confirm with "menu/ok".
86