Related Manuals for Melitta MEMB1B Mill & Brew
Summary of Contents for Melitta MEMB1B Mill & Brew
- Page 1 READ AND SAVE THESE INSTRUCTIONS WARNING: A risk of fire and electrical shock exists in all electrical appliances and may cause personal injury or death. Please follow all safety instructions.
-
Page 2: Important Safeguards
• Read all instructions before using appliance. • Do not touch hot surfaces. Use handle. • Do not immerse cord, plug or coffeemaker base in water or other liquid. See instructions for cleaning. • This appliance is not for use by children. - Page 3 Safeguards (Continued) parts inside. Repair must be done by authorized service personnel only. • The mill is intended for processing small quantities of coffee beans only for immediate consumption. This appliance is not intended to prepare large quantities of ground coffee at one time. •...
- Page 4 2. Water Window 3. Pause and Pour 4. Decanter Lid 5. Decanter 6. Cord Storage 7. Warming Plate 8. Coffeemaker Base 9. Control Panel 10. LED Display 11. Lock Buttons 12. Mill and Brew Assembly 13. Mill/Brew Assembly Lock 14. Mill/Brew Assembly Lid 15.
-
Page 5: Setting The Clock
COFFEEMAKER: Clean the decanter and its lid, mill/brew basket and its lid, and mill/brew assembly. See Care and Cleaning. Fill the coffeemaker with the maximum amount of water and no coffee and turn the unit ON. See Brewing. Unplug coffeemaker and discard the water. - Page 6 3. After brewing is complete, remove decanter from warming plate and serve. Coffeemaker warming plate will cycle on and off to maintain proper coffee temperature for one hour before it automatically shuts off and the red ON light turns off.
-
Page 7: Care And Cleaning
MACHINE IN LIQUIDS. NEVER CLEAN MACHINE UNDER RUNNING WATER. Decalcification of Your Mill & Brew Coffeemaker For best tasting coffee, and to promote longer use of your Mill & Brew, follow the procedure for decalcification every month, or after 30 uses. - Page 8 10. Press ON button. Allow all solution to empty into decanter. After dripping stops, press OFF button and discard solution. 11. Allow coffeemaker to cool 10 minutes. Rinse it out by brewing a decanter full of cold water. Discard water.
-
Page 9: Troubleshooting Guide
Troubleshooting Guide • If mill/brew lid is opened during brewing cycle, ON/OFF LED will flash. To restart brewing process, reclose mill/brew lid. • To position or remove the mill/brew assembly, press inward on the indentations on top of the lock buttons. Open mill/brew lid and lift up if removing, or place into position and then release lock buttons. - Page 10 NOTES...
-
Page 11: Important Notice
USA, and does not extend to any units which have been used in violation of written instructions furnished by Salton, Inc., or to units which have been altered or modified or to damage to products or parts thereof which have had the serial number removed, altered, defaced or rendered illegible. - Page 12 Include $15.00 (U.S.) for return shipping and handling. Salton, Inc. cannot assume responsibility for loss or damage during incoming shipment. For your protection, carefully package the product for shipment and insure it with the carrier. Be sure to enclose the following items with your appliance: any accessories related to your problem; your full return address and daytime phone number;...