Table of Contents
Advertisement
Safety Instructions
When using this product, basic
precautions should always be
followed, including the following:
●
Read the operating instructions of the
engine manufacturer before start-up
and follow the safety instructions
carefully.
●
Read all instructions before using
product.
●
To reduce the risk of injury, close
supervision is necessary when the
product is used near children.
●
Know how to stop the product and
bleed pressures quickly. Be
thoroughly familiar with the controls.
●
Stay alert - watch what you are doing.
●
Do not operate when fatigued or
under the influence of alcohol or
drugs.
●
Keep operating area clear of all
persons.
●
Do not overreach or stand on
unstable support. Keep good footing
and balance at all times.
●
Wear safety goggles and ear
protection.
●
Follow the maintenance instructions
specified in the manual.
●
To avoid risks, all repairs and
replacement of spare parts should
only be carried out by trained
personnel.
●
Tire pressure should not exceed max.
25 psi.
Risk of injection or injury – Do not
direct discharge stream at persons.
●
High pressure jets can be dangerous
if misused. The jet must not be
directed at persons, animals,
electrical devices, or the unit itself.
Do not spray electrical connec-
tions, electrical outlets or fixtures.
●
Do not use acids, solvents, or any
alkaline or flammable material in this
product. These products can cause
physical injuries to the operator and
irreversible damage to the machine.
Gun kicks back – Hold with both
hands.
●
The trigger gun safety lock prevents
the trigger from accidentally being
engaged. This safety feature must be
engaged when replacing nozzles or
not in use.
English 5
Advertisement
Table of Contents
