Setup By Learning Function In The Stb Mode; Deleting Of Learnt Keys From Original Stb Remote Unit - Tele System All in One 58040107 Quick Manual

4. To get the first digit of the code, press singularly the numeric button from 0 to 9 until
the STB STB STB STB LED LED LED blinks once. The number that lights up the TV LED LED
searched digit.
5. Repeat the above step 3 times in order to find the remaining three digits of the code.
6. After having the last digit of the code, the STB
NOTE NOTE NOTE NOTE
When the STB STB STB button is not programmed the default code is 2002 STB
6.4 Setup by learning function 6.4

Setup by learning function in the STB mode

6.4 6.4 Setup by learning function Setup by learning function
The learning function is used to extend the default programs of the standard STB code list
(see the list at the end of user manual), thanks to the Learning function. A fully functional
original remote control of the STB set is required. Please also use new batteries for both
the original STB remote control and the universal.
1. Align the IR sensors of both remote control units and keep them so at a closed distance
(around 25 mm) for all the procedure.
2. Press and release the STB
3. Simultaneously press and hold both the POWER
seconds until STB STB LED
STB STB
buttons.
4. Enter the 4-digit code 8700
5. Press and release the button of the universal remote unit to be taught (learned) with
the original remote button command. Please note TV
buttons.
6. Press and hold the original remote unit button until the LED TV indicator blinks off
once. Then release the button. If there is a mistake the TV
staying in learning mode. Repeat 4-5.
7. Repeat the steps 5 and 6 for all the other buttons to learn from the original remote
control.
8. When you finish learning all needed buttons, press the TV
you have learned from original remote control. The TV
CAUTIONS CAUTIONS CAUTIONS CAUTIONS
• Every button keeps the learned function even after changing the STB program code.
For restoring the full functionality of previously four digits STB code of library
programmed see next section 6.5.
• The capturing is not immediate, it may take some seconds.
6.5 D D D D eleting 6.5 eleting of learnt keys from original STB remote unit of learnt keys from original STB remote unit
6.5 6.5 eleting eleting of learnt keys from original STB remote unit of learnt keys from original STB remote unit
To delete all the codes set for the TV button, proceed as follows:
1 Press and release the STB
2 Simultaneously press and hold both the POWER
seconds until STB STB LED
STB STB
buttons.
3 Enter the four digit code 8899
each button press and after turn off.
CAUTION CAUTION
CAUTION CAUTION
A reset will cancel any learned keys in STB mode from original remote unit and restore
the full functionality of the four digits code chosen previously from STB code library.
in the STB mode
in the STB mode in the STB mode
STB button. STB STB
LED indicator will be stay on. Release then the POWER
LED LED
8700 using the numeric keys 0-9.
8700 8700
STB button.
STB STB
LED indicator will be stay on. Release then the POWER
LED LED
8899 using the numeric buttons 0-9. The STB
8899 8899
TV LED corresponds with the TV LED TV LED
STB LED STB STB LED will turns OFF. LED LED
2002 2002 2002
POWER and MUTE MUTE buttons for approx. 3
POWER POWER MUTE MUTE
TV and STB STB are not programmable
TV TV STB STB
TV LED TV TV LED LED will flash for 3 seconds LED
TV TV button to save all commands TV
TV LED LED turns off.
TV TV LED LED
POWER and MUTE MUTE buttons for approx. 3
POWER POWER MUTE MUTE
TELE System
POWER and MUTE MUTE
POWER POWER MUTE MUTE
POWER and MUTE MUTE
POWER POWER MUTE MUTE
STB LED LED blinks for
STB STB LED LED
7