Stb Button Programming; Programming By Predefined Stb Brand Codes; Setup By Manual Search In The Stb Code Library; To Identify The Stb Brand Code Programmed - Tele System All in One 58040107 Quick Manual

ALL.IN.ONE

6 6 6 6 STB button programming

STB button programming
STB button programming STB button programming
6.1 Programmin 6.1

Programming by predefined STB brand codes

6.1 6.1 Programmin Programmin
The default STB brand codes are listed at the end of this user manual. Detect the brand of
your STB set, then follow these steps:
1. Make sure your decoder is switched on (not in stand-by).
2. Press and release the STB
3. Simultaneously press and hold both the POWER
seconds until STB LED STB LED indicator will be stay on. Release then the POWER
STB LED STB LED
buttons.
4. Enter the 4-digit TV/STB brand code (from the lists) by using the numeric buttons 0÷9.
5. The STB LED STB LED will turn off if the remote control accepts the code after the four digits.
STB LED STB LED
CAUTION CAUTION
CAUTION CAUTION
If the code is wrong, the LED will flash 3 times and turn off; in this last case, repeat the
procedure.
6. Check the functions of the buttons of the remote control. If it does not function
correctly, try another 4-digit TV set code from the list under the same brand by
repeating the steps from 1 to 5 until all basic functions operate correctly.
If the STB brand is not present in the list or the setup is unsuccessful, try the next method.
6.2 Setup by manual search 6.2

Setup by manual search in the STB code library

6.2 6.2 Setup by manual search Setup by manual search
1. Make sure your STB device is switched on (not in stand-by).
2. Press and release the STB
3. Simultaneously press and hold both the POWER
seconds until STB STB LED STB STB
buttons.
4. Point the remote control at the television to be controlled and press PROG+
POWER) once. After a few of seconds the remote starts stepping through the code POWER
POWER POWER
library (fast search, 1 code for second).
5. You can press PROG+
search, 1 code any 3 seconds).
6. You can press PROG+ PROG+ (or POWER
PROG+ PROG+
7. If your code is accidentally passed, then press PROG
8. As soon as the TV set responds to the command, by going in stand-by or changing
channel, press the OK
9. Check whether the other buttons of the remote control function properly. If the
majority of the buttons does not function correctly, repeat the procedure starting from
the first step.
6.3 To To To To identify 6.3 identify the the STB
6.3 6.3 identify identify the the
To identify the STB brand code in use by the remote control, follow these steps:
1. Press and release the STB
2. Simultaneously press and hold both the POWER
seconds until STB STB LED
STB STB
buttons.
3. Press shortly POWER POWER and MUTE POWER POWER
6
g by predefined STB brand codes
g by predefined STB brand codes g by predefined STB brand codes
STB button.
STB STB
in the STB code library
in the STB code library in the STB code library
STB button.
STB STB
LED indicator will be stay on. Release then the POWER LED LED
PROG+ (or POWER POWER) a second time to switch to slow search (slow
PROG+ PROG+ POWER POWER
POWER) repetitively to carry out a manual search.
POWER POWER
OK button to save the code. The STB
OK OK
STB brand code programmed brand code programmed
STB STB brand code programmed brand code programmed
STB button.
STB STB
LED indicator will be stay on. Release then the POWER
LED LED
MUTE together and the STB LED MUTE MUTE
POWER and MUTE MUTE buttons for approx. 3
POWER POWER MUTE MUTE
POWER and MUTE MUTE buttons for approx. 3
POWER POWER MUTE MUTE
PROG- - - - to backtrack through the library. PROG PROG
STB LED LED will turn OFF.
STB STB LED LED
POWER and MUTE MUTE buttons for approx. 3
POWER POWER MUTE MUTE
STB LED STB LED flashes three times. STB LED
POWER and MUTE MUTE
POWER POWER MUTE MUTE
POWER and MUTE POWER POWER MUTE MUTE MUTE
PROG+ (or
PROG+ PROG+
POWER and MUTE MUTE
POWER POWER MUTE MUTE